4 STANDARD MODULES
FRH
1/2 MRH
MRH
TRH
Our modular screws are composed of 4 different modules whith standard diameters: 2", 3", 4", 6", 9"and 12" (the whole can be adjusted to intermediate diameters, if necessary).
You will thus find a flange (FRH), supply (1/2 MRH), conveying (MRH) and termination (TRH) module to build a screw adapted to your needs.
1
Our modules are stacked on a hexagonal axis made of C35 steel or 304 stainless steel. The modularity of the conveyor thus facilitates the assembly and maintenance of the machines. A key element of the conveyor, the hexagonal axis connects the motor and the heart of the conveyor, keeping its driving force centralized.
THE SOUL OF THE SCREW
FLOATING SCREW TERMINATION
2
Our conveyors being lighter than a steel screw, we have the possibility of installing floating screws (without any fixing on the side of the material outlet). The axis will be drilled there and then threaded. Everything will be maintained and closed by a washer and a screw.
TERMINATION WITH SOCKET
3
The axis will be drilled in its width and machined to the diameter of the bearing and the sleeve which ensures the compression of the modules.
TERMINATION
&
KEY PATH
4
On the motor side, the axis will be machined to the diameter of a sleeve. More than ten configurations are possible (adapted to your needs), here are 2:
AXLE CONNECTOR
5
Allows the connection and extension of C35 steel or 304 stainless steel shafts.
CONFIGURATION OF CONVEYORS
With these standard modules you are able to create the screw profile that exactly matches your needs. If you want to optimize the operation of your installation, for example with the addition of an extraction zone, you can easily add modules in half-steps, even after you have built your conveyor.
